Battery Powered Ultrasonic Flowmeter TDS-100F1W Clamp-On Sensor DN15-6000mm S2 M2 L2 transducer digital water flow meter
Features:
●Low starting flow, accuracy class 1.0 (national standard JJG1030-2007), two-way measurement.
●Battery power supply, suitable for measurement needs of various occasions without power supply.
●Strong anti-interference ability
●With a variety of output functions, it can be connected with GPRS/GSM wireless transmission to form a monitoring system.
●With PT1000 temperature sensor, the heat accumulation function can be realized.
Technical parameters:
Battery life: 6 years (not using backlight)
Measurement accuracy: Class 1.0
Repeatability: 0.2%
Measurement cycle: 1s (1 time per second, 128 data collected per cycle)
Velocity range: (0～±12) m/s (qt=0.3m/s, velocity resolution 0.001m/s) forward and reverse bidirectional measurement
Working power: Lithium battery/8~36VDC
Display: Four-line English backlight LCD can display instantaneous flow, cumulative flow, flow rate, etc.
Operation: 4 touch keyboard operation
Signal input: 2-way PT1000 platinum resistance
Signal output: 1 isolated RS485 output
Communication protocol: MODBUS protocol
Other functions: ◇Automatic memory of the first 212 hours, the first 300 days, the first 60 months, the first 10 years of positive/negative net cumulative flow
◇Programmable batch (quantitative) controller, fault self-diagnosis function
◇Can realize software upgrade
Protection class: sensor IP68, host IP65
Optional sensors are: clamp-On type, plug-in type, and pipe segment type.
Standard Packaging:
TDS-100F1W Host
Steel Belt
M2 sensor (Please select a suitable sensor according to the pipe diameter)
10 meters Signal Cable
Connection terminal
